FLEETBOARD DispoPilot.Guide - Settings Brightness; Date; Navigation; Time Zone

X
Select the desired language.
X
Press the ÷ button to confirm.
The language settings only apply to the
menus displayed. Logistics service status
messages and forms are uploaded to the
equipment
by FleetBoard
®
Support in the cor-
responding language.
Setting the country code (time zone)
Use this function to set the DispoPilot time
display
to the time zone in which DispoPilot is
currently operating.
X
Select the Country settings menu.
X
Select the Country code menu.
X
Select the desired country code.
X
Press the ÷ button to confirm.
Setting the date format
The date format display can be changed using
this function.
R
alphanumeric format (DD.MM.YYYY
HH:MM)
R
international standard format (MM/DD/YY
HH:MM AM/PM)
X
Select the Country settings menu.
X
Select the Date format menu.
X
To select the desired date format: activate
the î selection field next to the desired
setting.
Setting the unit of length
Use this function to determine which unit of
length is used for navigation.
X
Select the Country settings menu.
X
Select the Unit of length menu.
X
To select the desired unit of measurement:
activate the î selection field next to the
desired setting.
Setting the brightness
Use this function to adapt the brightness of
the screen to the ambient light.
X
Select the Display menu.
X
Select the desired screen brightness.
X
Press the ÷ button to confirm.
Setting the screen saver
Use this function to select whether the screen
backlighting goes out automatically after a
certain period of time.
X
Select the Display menu.
X
To select the desired setting: tick O the
box.
X
Press the ÷ button to confirm.
Setting the volume
Use this function to set the volume for audio
signals (e.g. for unread messages) and for
navigation messages.
X
Select the Audio menu.
X
Select the desired volume.
X
Press the ÷ button to confirm.
Setting the barcode profile
Use this function to select one of the different
barcode profiles.
i
DispoPilot has a standard profile for bar-
code recognition. Contact FleetBoard
®
Support
if you wish to enhance the existing
profile.
X
Select the Barcode profile menu.
X
To select the desired barcode profile: tick
O the box next to the desired setting.
X
Press the ÷ button to confirm.
Navigation settings
The following menus are available:
DispoPilot settings
11
Overview and operation
Z