General
R
Voice output
R
Map orientation
R
POI radius
R
Checking vehicle settings when navigation
starts
Route profile
R
Route options
R
Toll roads
R
Ferries
Vehicle
R
Vehicle profile
R
Height
R
Width
R
Length
R
Actual gross vehicle weight
R
Maximum axle weight
R
Ignore limitations
R
Hazard class
Calling up the "Navigation settings"
menu
X
Select SETTINGS ì.
X
Select the Navigation menu.
Setting the voice output
Use this function to set the language to be
used during navigation for:
R
system elements
R
displayed messages
R
audible messages
X
Select the General menu.
X
Select the Language menu.
X
To select the desired language: tick O the
box next to the desired setting.
X
Press the ÷ button to confirm.
Setting map orientation
Use this function to set whether the map is
oriented to the North or in the direction of
travel.
X
Select the General menu.
X
Select the Map orientation menu.
X
To select the desired setting: activate the
î selection field next to the desired set-
ting.
R
North orientation: the map is orien-
ted
towards the North (North is always at
the top).
R
Travel direction: the map is aligned
with the direction of travel (the direction
of travel is always at the top).
X
Press the ÷ button to confirm.
Setting the POI radius
Use this function to set the radius around the
vehicle's current position in which POIs are
selected.
X
Select the General menu.
X
Select the Special
destination radius
menu.
X
Select the desired radius.
X
Press the ÷ button to confirm.
Checking vehicle settings when naviga-
tion starts
Use this function to set whether the following
information
should be displayed for checking
before route calculation is started:
R
Route options
R
Toll roads
R
Ferries
R
Truck height
R
Truck width
R
Truck length
R
Actual gross vehicle weight
R
Maximum axle weight
12
DispoPilot settings
Overview and operation
To Next Page
Loading...