Flex L 8-11 115 User Manual

L 8-11 115 / L 8-11 125 / LE 9-11 125
20
Instructions for use
WARNING!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the power tool
Unpack the angle grinder and check that
there are no missing or damaged parts.
Attach the guard
WARNING!
When using the angle grinder for roughing
or cutting, never work without the guard.
A special cutting guard must be used for
cutting.
 Pull out the mains plug.
 Attach the guard (1.). Lugs on the guard
hood must be located in the flange
recesses (2.).
 Turn guard hood clockwise.
Rotation is possible in one direction only!
 Remove in reverse order.
Attach the handle
NOTE
It is not permitted to operate the electric
power tool without the handle.
Attaching/changing the tool
 Pull out the mains plug.
Attach the grinding wheel
 Press and hold down the spindle lock (1.).
 Using the face spanner, loosen the
clamping nut on the spindle in an anti-
clockwise direction and remove (2.).
 Insert the grinding wheel in the correct
position.
 Screw the clamping nut with flange face
up, onto the spindle.

Flex L 8-11 115 Specifications

General

Spindle thread	M14
Idle speed (max)	11500 RPM
Grinding disc diameter	115 mm
Input power	800 W
Cable length	4 m
Output power	450 W
Power source	AC
Product color	Black, Red

Weight and Dimensions

Weight	2000 g