FF20 IH EN 74-215-051 v1.02.doc Version: 1.02 Page 3 of 21
2 Introduction
All the photographs in the handbook are photo examples and may vary slightly from the exact model; i.e.
type of bottle used on the photograph, type and guiding on the inlet and outlet trays etc.
2.1 FF20
FlexFeed 20 is a rotary bottle handling system.
A rotary table moves the bottles from the inlet area to the bottle sluice, from which each bottle is moved
further on by a bottle pusher.
Filling is performed automatically when a bottle is present below the filling nozzle.
After filling, the bottle is pushed towards the outlet tray.
FF20 is delivered without an external filler.
In order to perform fillings, a filler must be connected. (See further information in section 3.5)
2.2 Abbreviations in this manual
To Next Page
Loading...
