Handling the camera11
11.7 Saving an image
Follow this procedure:
1. To save an image, pull the trigger.
Note Depending on the settings in (Settings) > Save options & storage, the following
may also happen:
• A preview image is displayed before the image is saved.
• An annotation tool or the annotation menu is displayed when the image has been
saved.
11.8 Operating the laser distance meter
11.8.1 General
The laser distance meter consists of a laser transmitter and a laser receiver. The laser dis-
tance meter determines the distance to a target by measuring the time it takes for a laser
pulse to reach the target and return to the laser receiver. This time is converted to a dis-
tance, which is displayed on the screen.
The laser transmitter also works as a laser pointer. When the laser is on, you will see a la-
ser dot approximately at the target.
WARNING
Do not look directly into the laser beam. The laser beam can cause eye irritation.
#T810190; r. AL/47698/47698; en-US
33
To Next Page
Loading...
Need help?
General
