Handling the camera11
5. In the camera, align the thermal and visual images (indicated by the two squares in the
image below), using the touchscreen arrows. The lens–camera combination is now
calibrated.
To repeat the procedure at a later time, go to Settings > Camera information > Calibrate
lens....
11.20 Calibrating the compass
It is recommended that the compass is calibrated every time you move the camera to a
new location.
11.20.1 Procedure
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(Settings) and push the navigation pad. This displays the Settings menu.
3. Use the navigation pad to select Device settings > Geolocation > Compass.
4. If the Compass check box is unchecked, push the navigation pad to enable the
compass.
5. Select Calibrate compass and push the navigation pad. Follow the on-screen
instructions.
Note You must rotate the camera slowly.
#T810190; r. AL/47698/47698; en-US
52
To Next Page
Loading...
Need help?
General
