Working with image modes15
15.3 Selecting an image mode
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(Image mode) and push the navigation pad. This displays a submenu.
3. Use the navigation pad to select one of the following:
•
(Thermal MSX).
•
(Thermal).
•
(Picture in picture).
•
(Digital camera).
Note If the *.csq video format is selected (Settings > Save options & storage > Video
compression) and the recording mode Video is selected (Settings > Recording mode),
it will only be possible to select the image mode Thermal.
4. Push the navigation pad to confirm and exit the menu mode.
5. If Picture in picture mode is selected, you can at this point move and resize the infrared
image frame using the touch screen. (For some camera models, the image frame is
locked in the center and cannot be moved.)
#T810190; r. AL/47698/47698; en-US
74
To Next Page
Loading...
Need help?
General
