User Interface Menus
5
Figure 5.28 Setting Temperature and Moisture Alarms
• Device Settings: Use the Device Settings menu to set the following pa-
rameters: Language, Date & Time, Connections (Bluetooth), Screen
Brightness, Lamp (Worklight) & Laser pointer, Auto Power Off, and Reset
(factory default reset, internal memory formatting, and PIN calibration).
These are explained below.
• Language selection: Use the navigation arrows and Select button
to
choose the desired display language.
Figure 5.29 Local language selections
#NAS100005; r. AL/76939/76957; en-US
21
To Next Page
