User Interface Menus
5
• Screen Brightness: Set the screen brightness as shown in the screen im-
ages below.
Figure 5.32 Setting the Screen Brightness
• Lamp and Laser Enable/Disable: Enable or disable both the Worklight
and Laser pointer. When enabled, press and hold the Worklight button
to
turn the Worklight ON or OFF. When enabled, press the Laser button
to
turn the Laser pointer ON (release the button to turn it OFF).
Figure 5.33 Enabling/Disabling the Laser pointer and the Worklight
• Auto Power OFF (APO): Set APO to a time value of 5, 10, 20, or 30 mi-
nutes. Set to OFF to disable APO.
Figure 5.34 Setting the Auto Power Off (APO) utility
#NAS100005; r. AL/76939/76957; en-US
23
To Next Page
Loading...
