User Interface Menus
5
• Reset options: Access this menu to reset the MR277 to factory default
conditions, to format (erase) the internal image memory, and to perform a
PIN Calibration. To recover from a MR277 crash (display freezes), press
and hold the UP and DOWN arrows for >10 seconds, until the MR277 re-
boots. No data will be lost by running this procedure.
Figure 5.35 Reset options screen
• Set Device Settings to Factory Default: Select RESET to perform the re-
set, or select CANCEL to abort.
Figure 5.36 Reset to Factory Default conditions
#NAS100005; r. AL/76939/76957; en-US
24
To Next Page
Loading...
