FLIR TG165 - Selecting Color Palettes (Grayscale;Hot-Iron); Adjusting Emissivity Settings

FLIRTG165USERGUIDEDocumentIdentifier:TG165‐en‐US_AA
20
9.4ColorPaletteSelection
TheTG165supportstwocolorpalettes,GrayscaleandHot‐Iron.ThedefaultpaletteisHot‐Iron.
1. Press
toaccesstheSettingsMenuandusethearrowstoscrolltotheCOLORPALETTE icon.
2. Usethe
buttontotoggleGrayscale

andHot‐Iron selections.
3. Whenselectioniscomplete,usethearrowbuttonstoscrolltoanothermenuitem.
9.5EmissivitySelection
Theemissivityisadjustablein0.01stepsfrom0.01to0.99;thedefaultvalueis0.95.RefertotheAppendixfora
listofcommonmaterialsandtheirrespectiveEmissivityfactors.

1. Press
to access the Settings Menu and use the arrow
buttonstoscrolltotheEMISSIVITY
icon.
2. Press
toopenthemenuitem.
3. PRESET EMISSIVITY SELCTION: Use the arrow buttons to scroll
to one of the preset emissivity factors (95, 80, 60, 30) as
shown in Fig 9‐6 and then press
 to confirm the
selection.ThemeterwillreturntotheSettingsMenu.
4. CUSTOM EMISSIVITY: Use the arrow buttons to scroll to the
CustomEmissivityicon asshowninFig9‐7andpress toinitiateediting.Nowusethearrow
buttonstoselectthedesiredemissivityvalue(from0.01to0.99).Press
toconfirmthecustom
settingandthemeterwillreturntotheSettingsMenu.
5. Use the arrow buttons to select another menu item or press
toreturntothenormaloperatingmode.







Fig9‐7SelectingaCustomEmissivity
Fig9‐6SelectinganEmissivityPreset