FLIR TG165 - FLIR TG165 Maintenance Guide; Battery Service and Replacement Options; TG165 Calibration Procedures; Cleaning the TG165 Device

FLIRTG165USERGUIDEDocumentIdentifier:TG165‐en‐US_AA
24
10Maintenance
10.1BatteryServiceandReplacement
Ifthebatterywillnotholdachargeandrequiresreplacement,pleasecontactFLIRSystemsfordetailsonreturning
theunitforservice.ForinstructionsonchargingthebatterypleaserefertoSection6.2ChargingtheBattery.
10.2Calibration
TheTG165iscalibratedatthefactorypriortoshipment.IfcalibrationisrequiredpleasecontactalocalFLIRservice
center.TheTG165isnotserviceableinthefieldandshouldonlybecalibratedbytrained,qualifiedFLIRpersonnel.
10.3Cleaning
Wipethehousingwithadampclothasneeded.Useahighqualitylenswipetoremovedirtorsmudgesfromthe
meterlensesanddisplaywindow.Pleasedonotuseabrasivesorsolventstocleanthemeterhousing,lenses,or
displaywindow.

