Flowserve Limitorque L120-85 - Page 49

49
Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-03-A4 – 06/15
flowserve.com
Piece Description Quantity
44 O-ring 1
45 Pipe Plug 1
47 O-ring 1
48 Retaining Ring 1
49 Spring Retaining Washer 1
50-1 Socket Head Cap Screw 5
50-2 Lockwasher 5
50-3 Hex Head Cap Screw 8
†
50-4 Lockwasher 8
‡
50-5 Hex Head Cap Screw 2
50-6 Lockwasher 2
50-7 Socket Head Shoulder Screw 2
50-16 Pipe Plug 4
50-23 Drive Screw 4
50-24 Pipe Plug 4
50-25 Socket Head Cap Screw 1
50-26 Lockwasher 1
51 Bearing Retaining Plate 1
52 Handwheel Shaft Washer 1
95 Torque Drive Nut 1
98 Torque Drive Nut Retaining Ring 1
100 Thrust Base Housing 1
101 Thrust Base Drive Sleeve 1
* Worm Shaft Assembly Component
† Four used on Motor (31-1)
‡ Four used on Handwheel End Cap(s)
Piece Description Quantity
102 Thrust Base Plate 1
103 Thrust Bearing 2
104 Thrust Washer 4
106 O-ring 1
107 Quad Ring 2
108 Shim Set 1
109 Grease Fitting (not shown) 1
110 Socket Head Cap Screw 4
111 Lockwasher 4
112 Socket Head Cap Screw 6
113 Lockwasher 6
182 Spinner Kit, Hardware 1
200-1 Electric Compartment Cover 1
200-2 Captive Screw 6
200-3 Lockwasher 6
300 Torque Switch 1
300-20 Socket Head Cap Screw 1
300-21 Lockwasher 1
305 Geared Limit Switch 1
305-47 Hex Head Cap Screw 2
305-48 Lockwasher 2
999 Nameplate (not shown) 1