EasyManua.ls Logo

Flowserve Limitorque L120-85 - 2.3 Product Identification

Flowserve Limitorque L120-85
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.3 Product Identification
The actuator nameplate is located on the back of the actuator, opposite the limit switch compartment.
The nameplate contains the following information:
• Product name
• Point of Manufacture
• Order Number
• Serial Number
• Customer Tagging
• Certification Information
The motor nameplate is located on the motor. The nameplate contains the following information:
• ID Number
• Run Torque
• RPM
• Full Load Amps
• Insulation Class
• Horsepower
• Number of Phases
• Motor Code
• Connection Diagram
• Start Torque
• Enclosure Type
• Volts
• Locked Rotor Amps
• Duty Rating
• Service Factor
• Frequency
• Ambient Temperature
Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-03-A4 – 06/15
6

Table of Contents