VERTICAL TURBINE PUMPS (VTPS) CENTRIFUGAL PUMPS ENGLISH 71569224 – 02-15
Page 3 of 76 flowserve.com
INDEX
PAGE
PAGE
Alignment of shafting (see 4.3, 4.6 and 4.9)
Assembly (6.10) ....................................................... 55
ATEX marking (1.6.4.2) ............................................. 7
Bill of materials reference numbers (11.1) …….......68
CE marking and approvals (1.2) ................................ 4
Certification (9) ........................................................ 67
Change notes (10.2) ................................................ 67
Clearances, impeller (6.7) ....................................... 51
Commissioning and operation (5) ........................... 35
Compliance, ATEX (1.6.4.1) ...................................... 6
Configurations (3.1) ................................................. 14
Copyright (1.4) ........................................................... 4
Design of major parts (3.3) ...................................... 17
Direction of rotation (5.4) ......................................... 41
Disassembly (6.8) .................................................... 51
Disclaimer (1.3) ......................................................... 4
Dismantling (6.8, Disassembly) ............................... 51
Drawings (8) ............................................................ 58
Duty conditions (1.5) .................................................. 4
Electrical connections (4.8) ..................................... 34
End of product life (2.5) ........................................... 14
Examination of parts (6.9) ....................................... 52
Fastener torques (6.6) ............................................. 50
Faults; causes and remedies (7) ............................. 56
Foundation (4.3) ...................................................... 21
General arrangement drawing (8.4) ........................ 67
General assembly drawings (8) ............................... 58
Grouting (4.4)........................................................... 23
Guarding (5.5).......................................................... 41
Handling (2.2) .......................................................... 10
Hydraulic, mechanical and electrical duty (5.10) ..... 46
Impeller clearance (6.7) ........................................... 51
Inspection (6.2.1 and 6.2.2) ..................................... 48
Installation (4) .......................................................... 21
Lifting (2.3) ............................................................... 10
Location (4.1) ........................................................... 21
Lubrication (5.2) ....................................................... 35
Maintenance (6) ....................................................... 47
Maintenance schedule (6.2) .................................... 47
Name nomenclature (3.2) ........................................ 16
Nameplate (1.7.1) ...................................................... 8
Nozzle loads (4.7.2) ................................................. 32
Operating limits (3.4.1) ............................................ 21
Ordering spare parts (6.3.1) .................................... 49
Parts lists (8) ............................................................ 58
Performance (3.4) .................................................... 21
Piping (4.7) .............................................................. 31
Pre-commissioning (5.1) .......................................... 35
Priming and auxiliary supplies (5.6) ........................ 41
Protection systems (4.10) ........................................ 34
Reassembly (6.10, Assembly) ................................. 55
Receipt and unpacking (2.1) .................................... 10
Recommended spares (6.4) .................................. 499
Recycling (2.5) ......................................................... 14
Replacement parts (6.3 and 6.4) ............................. 49
Running the pump (5.8) ........................................... 45
Safety action (1.6.3) ................................................... 5
Safety labels (1.7.2) ................................................... 8
Safety markings (1.6.1) .............................................. 5
Safety, protection systems (see 1.6 and 4.10)
Sealing arrangements (3.3.7) .................................. 19
Sectional drawings (8) .............................................. 58
Setting impeller clearance (6.7) ............................... 51
Sound pressure level (1.9, Noise level) ..................... 8
Spare parts (6.3) ...................................................... 49
Specific machine performance (1.8) .......................... 8
Starting the pump (5.7) ............................................ 42
Stop/start frequency (5.7.8) ..................................... 45
Stopping and shutdown (5.9) ................................... 46
Storage, pump (2.4) ................................................. 14
Storage, spare parts (6.3.3) ..................................... 49
Supplementary manuals or info. sources (10) ......... 67
Supplementary User Instructions (10.1) .................. 67
Thermal expansion (4.6.1) ....................................... 30
Tools required (6.5) .................................................. 49
Torques for fasteners (6.6) ...................................... 50
Trouble-shooting (7) ................................................. 56
Vibration (5.7.7) ........................................................ 44
To Next Page
Loading...
Need help?
General
