Fluke 1523 User Manual

3
Before You Start
CE Comments
Table 1 International Symbols
Symbol Description Symbol Description
AC (Alternating Current) PE Ground
AC-DC Hot Surface (Burn Hazard)
Battery
Read the User’s Guide (Important
Information)
Complies with European Union
directives
Off
DC On
Double Insulated Canadian Standards Association
Electric Shock C-TICK Australian EMC mark
Fuse
The European Waste Electrical
and Electronic Equipment (WEEE)
Directive (2002/96/EC) mark.
1.4 CE Comments
1.4.1 EMC Directive
Hart Scientic’s equipment has been tested to meet the European Electromagnetic
Compatibility Directive (EMC Directive, 2004/108/EC ). The Declaration of Confor-
mity for your instrument lists the specic standards to which the unit was tested.
The instrument was designed specically as a test and measuring device. Compliance
to the EMC directive is through EN 61326-1:2006 Electrical equipment for measure-
ment, control and laboratory use – EMC requirements
As noted in the EN 61326-1, the instrument can have varying congurations. The
instrument was tested in a typical conguration with shielded RS-232 cables.
1.4.2 Immunity Testing
1.4.2.1 For Use As a Portable (Hand-held) Instrument
The instrument was tested to Basic Immunity Requirements for portable test and mea-
surement equipment.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Fluke 1523 Specifications

General

Resolution	0.001°C
Display	LCD
Data Logging	Yes
Input Types	RTD, Thermocouple
Interface	RS-232
Power Supply	AC adapter
Accuracy	±0.005°C