Fluke 1523 - Serial Commands - Alphabetic Listing

1523, 1524 Reference Thermometer
Serial Commands - Alphabetic Listing
48
Functions or
Groups
SCREEN
PARAMETER Command
Password
Protection
Group Read/Write
System -
Communication
BAUD RATE SYST:COMM:SER:BAUD? N/A R
BAUD RATE SYST:COMM:SER:BAUD <baud> N/A W
SERIAL PORT SYST:COMM:SER:OFF N/A W
System -
Information
(all) *IDN? N/A R
(none) *CLS N/A W
(none) SYST:SNUM? N/A R
(none) SYST:VERS? N/A R
(none) SYST:ERR? N/A R
DATE SYST:DATE? N/A R
DATE SYST:DATE <year>,<month>,<day> N/A W
TIME SYST:TIME? N/A R
TIME SYST:TIME <hour>,<minute>,<second> N/A W
System - Password (none) SYST:PASS:CDIS N/A W
PASSWORD SYST:PASS:CEN N/A W
(none) SYST:PASS:CEN:STAT? N/A R
USER PASSWORD SYST:PASS:NEW conditional W
*indicates the command is password controlled. Reference “System - Password” section for password input.
6.4 Serial Commands - Alphabetic Listing
Each command description provides the structure (long and short format), a descrip-
tion of the command purpose, a command example, an example of what the command
returns (as applicable to query commands), and notes specic to the command. The
following apply to each group of commands:
●
Numeric data, specied by the mnemonic, <num>, uses ASCII characters to
represent numbers. Numbers may contain a plus or minus (‘+’ or ‘-’) sign,
decimal point (‘.’), and exponent (‘E’ or ‘e’) with its sign. If a fractional
component is received when only an integer is required, the number is rounded
to the nearest integer without any resulting error message. The mnemonics DEF,
MIN, and MAX are often acceptable for the default, minimum, and maximum
value respectively. Unit sufxes, such as V or OHM, can be appended to
numeric parameters and are accepted without error but ignored.
●
Unrecognized commands or commands with incorrect syntax or invalid
parameters generate error messages in the error queue.
●
Upper case letters designate syntax that is required when issuing the command.
Lower case letters are optional and may be omitted.
●
< > indicates a required parameter.
●
[ ] indicates optional parameters.
●
( ) indicates a group of parameters that must be used together.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com