Fluke 1523 User Manual

1523, 1524 Reference Thermometer
SAVE
34
4.5.3.6 Baud Rate
This feature allows the user to change the baud rate from 9600 (default) or 2400 baud.
4.5.3.7 Date/Time
This feature allows the user to change or adjust the Time and Date. The time and date
is recorded on all Log les saved. This feature is only available on model 1524.
4.5.3.7.1 Date
The date feature allows the user to adjust the month, day and year in an YYYY/MM/
DD format. The date can be adjusted by using the up and down arrow keys while
in the date eld, and pressing the ENTER key to save the change. The curser will
highlight the year <YYYY> eld when entering into this screen. Use the up and down
arrow keys to adjust the year. Press the ENTER key to save the change and advance to
the month <MM> eld. Adjust the months in the same manner and press the ENTER
key when complete. This will advance the curser to the next eld, days <DD>. Change
the days eld to the correct day in the same manner and press the ENTER key when
complete. This feature is only available on model 1524.
4.5.3.7.2 Time
The time feature allows the user to adjust the HH/MM/SS in 24 hour format. The time
can be adjusted by using the up and down arrow keys while in the time eld, and then
pressing the ENTER key to save the change. The curser will highlight the hour <HH>
eld when entering into the time elds from the date elds. Use the up and down ar-
row keys to adjust the hour. Press the ENTER key to save the change and advance to
the min <MM> eld. Adjust the minutes in the same manner and press the ENTER
key when complete. This will advance the curser to the next eld, seconds<SS>.
Change the seconds eld to the correct second in the same manner and press the EN-
TER key when complete. This feature is only available on model 1524.
4.6 SAVE
A point is saved into the demand log when the SAVE key is pressed while in the nu-
meric or graphic display mode. Up to 25 points may be stored using the demand log.
When the SAVE key is pressed, the bottom row of the display will indicate that a save
has occurred with a tag ID “SAV01” (followed by a date and time if model 1524). If
there are 25 points already stored, SAV FULL (save full) will be displayed for 3 sec-
onds and no new data will be recorded.
4.7 ARROWS, UP, DOWN
The up and down arrow keys allow the user to select options within a eld indicated
by an up and down arrow indicator to the right or left of the eld.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Fluke 1523 Specifications

General

Resolution	0.001°C
Display	LCD
Data Logging	Yes
Input Types	RTD, Thermocouple
Interface	RS-232
Power Supply	AC adapter
Accuracy	±0.005°C