Fluke 1535 - Display

1535/1537
Users Manual
10
Display
Ta b l e 4 shows the location of each display feature.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
 Before and after any tests, do a voltage test to confirm that the
Tester does not detect the presence of hazardous voltage.
 If the Tester beeps continuously before the insulation test starts
and there is hazardous voltage, disconnect test leads and remove
power from the circuit under test.
Table 4. Display Features
Item Description
A
Ramp mode
B
Dielectric Discharge
C
Polarization Index
D
Dielectric Absorption Ratio
E
Electrical breakdown in Ramp mode
F
Interference present; readings could be out of specified accuracy
range
2
3
4
5
6 7 9 10
11
12
13
14
15
16
17
18
8
1
19
20