1535/1537
Users Manual
14
Note
The Tester does not have specified accuracy below 200kΩ . When
you do a test below 200kΩ or with the leads shorted, the Tester can
show a reading. This is normal for the input circuitry configuration for
this Tester. Only the readings within the specified accuracy range are
accurate.
Before an Insulation Test
The Tester includes features that let you adapt the test to your requirements.
Yo u ca n :
• Define a test voltage
• Measure polarization index (PI)
• Measure dielectric absorption ratio (DAR)
Table 5. Test Lead Connections
Item Description
A
E - Earth Terminal
B
L - Live Terminal
3
0
V
M
A
X
E
L
2
1
To Next Page
Loading...
