Insulation Tester
Maintenance
25
For complete information about how to use the software, see the Help module
in the software.
Maintenance
There are no user-replaceable parts inside the Tester.
XW Warning
To prevent possible electric shock or personal injury:
Do not repair or service the Product beyond what is described in
this manual.
Have an approved technician repair the Product.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents to clean the Tester.
Battery Replacement
To replace the batteries:
1. Turn off the Product and remove all test leads.
2. Turn the battery-door latch until the unlock symbol (N) aligns with the slot.
See Figure 4.
3. Lift off the battery door.
4. Remove the AA batteries and replace with new batteries. Use the correct
battery orientation.
5. Install the battery door.
6. Turn the battery-door latch until the slot is vertical to the unlock
symbol(
N).
To Next Page
Loading...
