Fluke 1537-II - Page 23

20
1535/1537/1537-II
Users Manual
To view stored test data:
1. With the Tester turned on, push
to view stored records.
2. Push or to select Record.
3. Push
or to view the record detail.
Note
When a voltage is present at the terminals, that voltage is always shown
on the top-center of the display, regardless of whether that voltage is
sourced by the Tester or is from the circuit under test. See
Table 6 .
Table 6. View Stored Results
2
3
1
Item Description
1
Terminal voltage between L and E
2
Stored record label (tag)
3
Stored test results
4. Push or to step through the stored locations.
5. Stop at the location you want to view.
6. Push
or to view the stored test data for a specic test. Test data
appears on the alphanumeric text display and on the LCD.