Fluke 1537-II - Display

6
1535/1537/1537-II
Users Manual
Display
Table 3 shows the location of each display feature.
XW
Warning
To prevent possible electrical shock, re, or personal injury:
• Before and after any tests, do a voltage test to conrm that the
Tester does not detect the presence of hazardous voltage.
• If the Tester beeps continuously before the insulation test starts
and there is hazardous voltage, disconnect test leads and remove
power from the circuit under test.
Table 3. Display Features
2
3
4
5
6 7 9 10
11
12
13
14
15
16
17
18
8
1
19
20
Item Description
1
Ramp mode
2
Dielectric Discharge
3
Polarization Index
4
Dielectric Absorption Ratio
5
Electrical breakdown in Ramp mode
6
Interference present; readings could be out of specied accuracy range
7
Continuity (1537/1537-II only)
8
Test Voltage Setting
9
Insulation test voltage
10
Discharging