Fluke 1537-II - Ac; V DC; Resistance (1537;1537-II Only)

22
1535/1537/1537-II
Users Manual
V ac / V dc / Resistance (1537/1537-II only)
The 1537/1537-II includes V ac / V dc and resistance measurement functions.
To do a V ac / V dc or resistance test, see Figure 9 :
1. Turn on the Tester.
2. Push
to select the V ac / V dc or resistance function.
3. Insert the test leads into the correct terminals. See
Table 7 .
4. Connect the test leads to the circuit under test.
The test result appears on the Tester when the test is complete.
Note
The Tester does not support test result records for the V ac / V dc /
Resistance measurements.
The Tester alarm beeps if the resistance measurement is ≤30 Ω.
Table 7. Connections for V ac / V dc / Resistance Tests
3
0
V
MAX
COM
1
2

V 
Item Description
1
V ac / V dc / Resistance
2
COM