24
1535/1537/1537-II
Users Manual
1537/1537-II PC Software
Fluke provides software that lets you download test results from the 1537/1537-II
Tester through the USB port, see Figure 10.
Before you can download stored test data from the Tester, you must download
the appropriate software from the Fluke website to your PC. After the download
completes, follow the software prompts to install the software.
• Install the software drivers on the Windows PC before you use the USB cable.
• Do not use the test functions during communication with the PC.
• Verify that the download is successful before deleting the stored test results on
the Tester.
• You can use the Fluke 1537/1537-II PC Software to clear results data stored in
the Tester from the PC.
Figure 10. USB Connection
»
To Next Page
Loading...
