Earth Ground Clamp
Safety Information
3
•
Do not use the Product above its rated
frequency.
•
Limit operation to the specified measurement
category, voltage, or amperage ratings.
•
Do not touch voltages >30 V ac rms, 42 V ac
peak, or 60 V dc.
•
Hold the Product behind the tactile barrier.
•
The battery door must be closed and locked
before you operate the Product.
•
Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
•
Remove the batteries if the Product is not used
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are
not removed, battery leakage can damage the
Product.
•
Do not operate the Product with covers
removed or the case open. Hazardous voltage
exposure is possible.
•
Repair the Product before use if the battery
leaks.
•
Use only specified replacement parts.
•
Have an approved technician repair the
Product.
•
Remove the input signals before you clean the
Product.
•
Do not operate within external low frequency
magnetic fields >30A/m.
Symbols used on the Product and in this manual are
explained in Table 1.
To Next Page
Loading...
Need help?
General
