27 II/28 II
Users Manual
2
Safety Information
The Meter complies with:
• ISA-82.02.01
• CAN/CSA-C22.2 No. 61010-1-04
• IEC Standard No. 61010-1:2001
• Measurement Category III, 1000V, Pollution
Degree 2
• Measurement Category IV, 600V, Pollution
Degree 2
In this manual, a Warning identifies conditions and
actions that pose hazards to the user. A Caution
identifies conditions and actions that may damage the
Meter or the equipment under test.
Symbols used on the Meter and in this manual are
explained in Table 1.
XWWarning
To avoid possible electric shock or personal
injury, follow these guidelines:
• Use this Meter only as specified in this
manual or the protection provided by the
Meter might be impaired.
• Do not use the Meter if it is damaged.
Before you use the Meter, inspect the
case. Look for cracks or missing plastic.
Pay particular attention to the insulation
surrounding the connectors.
• Make sure the battery door is closed and
secured before operating the Meter.
• Replace the battery as soon as the
battery indicator () appears.
• Remove test leads from the Meter before
opening the battery door.
To Next Page
Loading...
Need help?
General
