Laser Distance Meters
Product Familiarization
3
Multifunction Endpiece
Use the multifunctional endpiece to adapt to multiple
measurement situations. A built-in sensor automatically senses
the orientation of the endpiece and adjusts the zero point. See
Figure 1.
• For measurements from an edge, fold out the endpiece
(90 °) until it locks into place. See Figure 2.
• For measurements from a corner, fold out the endpiece
(90 °) until it locks into place. Push the endpiece lightly to the
right side to fold it out fully. See Figures 1 and 3.
Figure 1. Multifunction Endpiece
Figure 2. Edge Measurements
Figure 3. Corner Measurements
To Next Page
Loading...
