Fluke 6500 - Understanding the Beeper Sounds; Understanding Displayed Symbols

Fluke 6500
Users Manual
6
Understanding the Beeper Sounds
The tester can make several types of beeper sounds.
Sound Meaning
Click A key is pressed.
1 beep A test passed.
2 beeps - A test failed.
- Warning, see display.
- The STOP key is pressed, the
current action is aborted.
Long beep Test will start in continuous
mode.
Continuous two
tone sound
Dangerous condition! Unplug the
unit immediately!
Understanding Displayed Symbols
The following symbols can be displayed:
Caution! Risk of Electric Shock.
Caution! Risk of Danger. Refer to Manual.
Ø
Bond test lead has been zeroed.
Auto-test or manual test failed.
Auto-test or manual test passed.
LMT
Applicable limit is exceeded.
The printer/PC is connected.
I II
Class I, Class II.
Use buttons .
Lock-out
on
Manual tests are locked out.