Need help?Do you have a question about the Fluke 1652C and is the answer not in the manual?
General| Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
|---|---|
| Loop and Line Resistance | 0.01 Ω to 2000 Ω |
| RCD Testing | Yes |
| Display | Digital |
| Frequency | 45 Hz to 65 Hz |
| Phase Sequence Indicator | Yes |
| Power Supply | 6 x 1.5 V AA batteries |
| Weight | 1.2 kg |
| Voltage AC | 500 V |
| Voltage DC | 500 V |
| RCD Trip Current | 10 mA, 30 mA, 100 mA, 300 mA, 500 mA |
| RCD Trip Test | 1x |
| Safety Standards | EN 61010-1 |
| Operating Temperature | -10°C to +50°C |
| Earth Resistance Test | Not available |
Lists critical warnings to prevent electrical shock, fire, or personal injury during operation.
Instructions for measuring insulation resistance, including safety precautions and test voltages.
Covers measuring loop impedance (L-PE) and line impedance (L-N) with different modes.
Details how to measure earth resistance using the loop test and a 3-wire connection.
Describes measuring line impedance to neutral and in 3-phase systems.
Details how to test battery status and replace batteries safely.
Procedure for manually checking the tester's fuse and identifying a blown fuse.
Defines accuracy specifications and provides tables for measurement limits and display values.
Specifies ranges, resolution, and accuracy for insulation resistance measurements.
Lists specifications for loop impedance tests in Hi Current, No Trip, and Hi Current modes.
Provides specifications for RCD tripping time and RCD tripping current tests.
Provides detailed specifications for insulation resistance measurements across different test voltages.
Specifies parameters for RCD/FI tests in No Trip and Hi Current modes.
Details the operating ranges and measurement uncertainties according to EN 61557 standards.
To Next Page
