Fluke 1652C User Manual

i
Table of Contents
Title Page
Introduction ................................................................................ 1
How to Contact Fluke ................................................................. 1
Safety ......................................................................................... 2
Unpacking the Tester ................................................................. 4
Operating the Tester .................................................................. 6
Using the Rotary Switch ......................................................... 6
Understanding the Pushbuttons.............................................. 7
Understanding the Display...................................................... 9
Input Terminals ....................................................................... 15
Using the IR Port .................................................................... 15
Error Codes ............................................................................ 16
Power-On Options .................................................................. 17
Making Measurements ............................................................... 19
Measuring Volts and Frequency ............................................. 19
Measuring Insulation Resistance............................................ 20
Measuring Continuity .............................................................. 21
Measuring Loop/Line Impedance............................................ 22
Loop Impedance (Line to Protective Earth L-PE) ................ 22
Earth Resistance Testing by Loop Method ......................... 25
Line Impedance................................................................... 26
Measuring RCD Tripping Time ............................................... 28
Measuring RCD Tripping Current ........................................... 32
RCD Testing in IT Systems .................................................... 34
Measuring Earth Resistance................................................... 34
Testing Phase Sequence........................................................ 36
Memory Mode ............................................................................ 37
Storing a Measurement .......................................................... 38
Recalling a Measurement ....................................................... 38
Clearing Memory .................................................................... 39
Uploading Test Results .............................................................. 40
Maintaining the Tester................................................................ 41
Cleaning ................................................................................. 41
Testing and Replacing the Batteries ....................................... 41
Testing the Fuse ..................................................................... 43
Specifications ............................................................................. 44
Features by Model .................................................................. 44

Fluke 1652C Specifications

General

Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V
Loop and Line Resistance	0.01 Ω to 2000 Ω
RCD Testing	Yes
Display	Digital
Frequency	45 Hz to 65 Hz
Phase Sequence Indicator	Yes
Power Supply	6 x 1.5 V AA batteries
Weight	1.2 kg
Voltage AC	500 V
Voltage DC	500 V
RCD Trip Current	10 mA, 30 mA, 100 mA, 300 mA, 500 mA
RCD Trip Test	1x
Safety Standards	EN 61010-1
Operating Temperature	-10°C to +50°C
Earth Resistance Test	Not available