1
Introduction
XW Warning
The information provided in this document is for the use of
qualified personnel only. Do not perform the verification tests
or calibration procedures described in this manual unless you
are qualified to do so.
The information in this manual deals with the 71X Series Process Calibrators (hereafter
referred to as “the Calibrator” or the “71X Calibrator”). The 71X Series includes the
712,714, 715, 717 1G, 717 30G, 717 100G, 717-15G, 717 300G, 717 500G, 717 1000G,
717 1500G, 717 3000G, 717 5000G, 717-10000G, 718 1G, 718 30G, 718 100G, 718
300G, and the 718Ex 30G, 718Ex 100G, and the 719 models.
This manual provides the following information:
• Precautions and safety information
• Specifications
• Basic maintenance (cleaning, replacing the battery and fuses)
• Verification test procedures
• Calibration and calibration adjustment procedures
• Accessories and replaceable parts
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
Need help?
General
