True-rms Multimeter
ATEX Safety Information
7
Table 1. Electrical Symbols
B
AC (Alternating Current)
J
Earth ground
F
DC (Direct Current)
I
Fuse
E
Capacitance
G
Diode
M
Battery. Low battery when displayed.
R
Continuity test or continuity beeper tone.
X
Hazardous voltage
T
Double insulated
W
Risk of Danger. Important information. See
Users Manual.
=
Do not mix with solid waste stream. Dispose
using a qualified recycler or hazardous material
handler.
CAT
III
IEC Measurement Category III
CAT III equipment is designed to protect
against transients in equipment in fixed-
equipment installations, such as distribution
panels, feeders and short branch circuits, and
lighting systems in large buildings.
CAT
IV
IEC Measurement Category IV
CAT IV equipment is designed to protect
against transients from the primary supply
level, such as an electricity meter or an
overhead or underground utility service.
P
Conforms to European Union directives.
)
Conforms to relevant Canadian and U.S.
Standards.
s
Inspected and licensed by TÜV Product
Services.
(
Conforms to ATEX directive.
To Next Page
Loading...
