HVAC True-rms Clamp Meter
Safety Information
7
Table 1 lists the symbols used on the Product and in this manual.
Table 1. Symbols
Symbol
Descripti
on
Consult user documentation.
W WARNING. RISK OF DANGER.
X
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
,
Application around and removal from uninsulated
hazardous live conductors is permitted.
AC (Alternating Current)
DC (Direct Current)
Both direct and alternating current
Earth
Battery. Low battery when shown on display.
T Double Insulated
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the low-
voltage MAINS installation.
To Next Page
Loading...
