Fluke 902 FC - Page 28

902 FC
Users Manual
24
To replace the batteries (see Figure 5):
1.
Turn the rotary switch to OFF
.
2.
Remove the test leads from the te
rminals.
3.
Loosen the battery door fastener and remove the door from
the case bottom.
4.
Remove the batte
ries.
5.
Replace the batteries with two new AA batteries.
6.
Reattach the battery door to the case bottom and ti
ghten the
fastener.
1
2
3
iad12.eps
Figure 5. Battery Replacement