BT520
Users Manual
1-6
• Use only correct measurement category (CAT), voltage, and
amperage rated probes, test leads, and adapters for the
measurement.
• Measure a known voltage first to make sure that the Product
operates correctly.
• Limit operation to the specified measurement category,
voltage, or amperage ratings.
• Keep fingers behind the finger guards on the probes.
• Remove all probes, test leads, and accessories before the
battery door is opened.
• Use the correct terminals, function, and range for
measurements.
• Use only test leads and adapters supplied with the Product.
• Install the CAT III protective cap of test lead when you use the
product in CAT III environment. The CAT III protective cap
decreases the exposed probe metal to <4 mm.
• Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
To Next Page
Loading...
Need help?
General
