Fluke BT520 - LCD Display

BT520
Users Manual
1-10
LCD Display
The Product has an LCD display that shows different elements for each measurement
function. Table 1-4 describes the typical elements for battery internal resistance
measurement in Sequence mode.
Table 1-4. Typical Elements on the LCD Display
1 2 3 4
5
6
7
8
9
10
11
16
17
19
20
18
121314
15
hsn055.eps
Item Description Item Description
 Profile name  Average readings

Probe connection status. A full circle means
connected; an empty circle means not
connected
 Softkey F4 – Profile
 Current date  Softkey F3 – Threshold
 Current time  Softkey F2 – Low Pass Filter
 Battery usage  Softkey F1 – Save (save current reading)
 Threshold indication 
Tested batteries VS Total number of
batteries in a string
 Test result (PASS, WARN, or FAIL)  Cursor position

Reading of battery internal resistance

At least one “data hold” succeeded (manual
or auto)
 Voltage reading  AutoHold function enabled
 Progress bar (Sequence mode only)  AutoSave function enabled