Fluke BT520 - Connect the Probe to the Product; Set the Audio; Turn On;Off Power

BT520
Users Manual
4-2
Table 4-1. Elements of the Interactive Test Probe
Item No. Name Function
 Display
Shows information such as measurement readings and battery
ID.
 LED indicator
Indicates the status of a measurement. Green means Pass;
orange means Warning; red means Fail.
 Save button Manually saves a measurement reading.
 Backlight key Turns on or turns off the backlight for the interactive test probe.
 Power key Turns on or turns off the interactive test probe.
 Speaker
Plays audio reminders (PASS, WARNING, FAIL, and battery
number) when enabled.
 Probe tip
Connects the interactive test probe to the measured unit. The
probe tips can be replaced.
 Tactile barrier
Hold the handle behind the tactile barrier to prevent personal
injury.
Connect the Probe to the Product
Before the interactive test probe is used, connect the probe to the Product.
Set the Audio
The interactive test probe has a speaker that can play audio reminders.
To set the audio:
1. Push  on the Product to open the Setup screen.
2. Use L to highlight Handle, and push the Select softkey.
Audio is already highlighted.
3. Push the Select softkey.
4. Use  and L to highlight Disable, Threshold result, Battery number, or Both.
5. Push the Confirm softkey.
6. Push the Back softkey to return to the Setup screen.
Turn On/Off Power
The interactive test probe is powered by the Product.
When the interactive test probe is connected to the Product, it automatically turns on.
Push the power key below the probe display to turn on or turn off the power of the
interactive test probe.
To conserve product battery power, push the power key below the handle display.