Use the Product
Use a Profile in Sequence Mode 3
3-3
Use a Profile in Sequence Mode
In Sequence mode, the Product lets you manage, categorize, and analyze data by
profiles. The figure below shows a typical profile.
hsn006.jpg
Manage Profiles
Each Product stores up to 100 profiles. A profile describes the battery maintenance
environment in a tree view.
For example:
• Site Name: Fluke
• Device name: ABC 500kVA
• Device ID: 1
• Battery string: 1
• Start ID: 1
In this case the upper-left corner shows the profile name Fluke-ABC 500KVA-1-1. The
PC software uses the same structure to categorize the profile.
Fluke recommends that you always use the same profile name for one battery string for
better analysis. The profiles are distinguished by their timestamps.
To Next Page
Loading...
