Fluke BT520 User Manual

BT520
Users Manual
3-6
Load a Profile When Switched to Sequence Mode
To load a profile when switched to Sequence mode:
1. On the Enter SEQUENCE mode? screen, push the Load softkey.
The Load profile screen shows the list of history profiles in the Product memory.
2. Use  and L to highlight the number of the profile to be loaded.
3. Push the Load softkey.
Configurations of the selected profile show on the display.
4. Push the Continue softkey to confirm loading the selected profile.
Name of the loaded profile shows on the upper-left corner of the display.
Load a Profile During Measurement in Sequence Mode
To load a profile during measurements in Sequence mode:
1. On the measurement screen, push the Profile softkey.
The Profile info screen shows.
2. Push the Load softkey.
The Load profile screen shows.
3. Use the Prev and Next softkeys and L to select a profile.
4. Push the Load softkey.
5. Push the Continue softkey to load the selected profile.

Fluke BT520 Specifications

General

Data Logging	Yes
Wireless Communication	Bluetooth
Battery Types	12 V
Resolution (Voltage)	0.001V
Display	LCD, backlit
Storage Temperature	-20°C to 50°C
Dimensions	10 cm x 100mm
Power Source	Rechargeable Li-ion battery