Fluke T6-1000 User Manual

Electrical Tester
Maintenance
11
Maintenance
If the Product is used appropriately it does not require special maintenance or repair. See www.fluke.com for locations and contact
information of Fluke Service Centers worldwide.
How to Clean
W Caution
For safe operation and maintenance, clean the case with a damp cloth and detergent. Do not use abrasives or
solvents.
If the Product is dirty, wipe it off carefully with a damp cloth (without cleaning agents). Mild soap may be used.
Battery Replacement
W Caution
For safe operation and maintenance of the Product:
• Remove batteries to prevent battery leakage and damage to the Product if it is not used for an extended period.
• Repair the Product before use if the battery leaks.
• Be sure that the battery polarity is correct to prevent battery leakage.
The Product has two AA (IEC LR6) alkaline batteries.
To replace the batteries:
1. Remove the battery door screw. See Figure 2.
Figure 2. Battery Replacement
2. Remove the battery door.
3. Replace the batteries.
4. Attach the battery door and battery door screw. Do not overtighten the screw.
2 AA
Do not
overtighten
screw

Fluke T6-1000 Specifications

General

Control type	Buttons, Rotary
Display type	-
Housing color	Black, Grey, Yellow
Jaw width (max)	17.8 mm
AC current range	- A
AC voltage range	- V
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Battery type	AA
Number of batteries supported	2
Carrying case	Yes

Weight and Dimensions

Depth	43.8 mm
Width	61.1 mm
Height	259.3 mm
Weight	350 g