1
Introduction
XW Warning
To avoid electric shock or personal injury, do not perform the calibration verification tests or calibration
procedures described in this manual unless you are qualified to do so. The information provided in this
manual is for the use of qualified personnel only.
This service information is for the T6-600 and T6-1000 Electrical Testers (the Product).
For complete operating instructions, see the Quick Reference Guide provided with your product.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
•
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-6714-3114
•
Singapore: +65-6799-5566
•
China: +86-400-921-0835
•
Brazil: +55-11-3530-8901
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com
.
To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals.
Safety Information
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the equipment under test.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Do not alter the Product and use only as specified, or the protection supplied by the Product can be
compromised.
•
Do not use the Product around explosive gas, vapor, or in damp or wet environments.
•
Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves, face
protection, and flame-resistant clothes) to prevent shock and arc blast injury where hazardous live conductors
are exposed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
