The illustration below shows the top view of the switch bay without the door. There is an
icon printed near each switch and switch position indicating their function. These functions
are explained in the next paragraphs.
Laser ON/OFF
Centigrade /
Fahrenheit selection
LCD backlight selection
Palette selection
Measurement mode selection
Level ad
ustment
Gain ad
ustment
Figure 11. Ti30 Imager Settings Switches
Laser On/Off Toggle Button
The Laser On/Off toggle button switches the laser on and off. By default, the guiding
laser beam is off. Depending on the situation you may or may not need the laser guidance
beam.
Jan 31st, 2005 - 20 -
To Next Page
Loading...
