Fluke Ti30 - Downloading and Saving Images; Initiating Image Download; The SYNC Button

Figure 48. InsideIR Main Screen With Session Open
Downloading Images
You are now ready to download the images you recorded in your Ti30 imager. Locate the
SYNC button in the docking station. Press the SYNC button once to begin the download
process. (Note: If you are having difficulty getting the SYNC function to work, place the
imager in the docking station and squeeze the imager’s trigger for 1 second. Then press the
SYNC button on the docking station, also for 1 second.)
SYNC button
Figure 49. The SYNC button
When synchronization completes, the following window appears:
Jan 31st, 2005 - 49 -