EasyManua.ls Logo

Flux beamo - Page 55

Flux beamo
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
The focus lens is inside the lens holder under the
third reflecting mirror. Lower down the honeycomb
plate or remove it to make room for later procedure.
Rotate the lens holder ring clockwise to release and
remove the lens holder.
release and remove the lens holder
Rotate the silver ring on the lens holder counter-
clockwise to take out the focus lens. Use pliers if the
ring is too tight to rotate.
When putting back the lens, the curved side should
face up and the flat side should face down.

Related product manuals