174 175
After use, ensure that you dispose of the
lubricant, cleaning and care products in an
environmentally friendly way. These sub
-
stances do not belong in domestic waste,
in the drain or in natural environments.
Smooth operation and durability of your
FLYER e-bike depend on appropriate
maintenance and care for your FLYER.
• Regularly clean your FLYER with
warm water, small amounts of clean
-
ing agent and a sponge.
• While cleaning the FLYER, always
check your e-bike for cracks, notches
or material deformities.
• Damaged parts must be changed with
original spare parts. Please only ride
your FLYER again after this check has
been carried out.
• Have possible paint damage removed
by your FLYER specialist retailer.
Further important information concerning care for
your FLYER e-bike is provided on the website of
your respective component manufacturer.
21. Wearing parts
Your FLYER is a technical product and therefore
requires regular inspection.
Many parts of your FLYER are subject to very
rapid wear, depending on their function and the
extent of usage.
This includes:
• Tyres
• Rims in connection with rim brakes
• Brake pads
• Brake discs
• Bicycle chain or drive belt
• Chain wheels, sprockets, jockey wheels
• Lighting system
• Handlebar grips
• Lubricants
• Gear and brake cables
• Bearings
• Suspension elements
Have your FLYER regularly inspected in
a FLYER specialised workshop and have
wearing parts changed as required. Reg
-
ular visual inspection for cracks, scratch-
es and damage to components is the re-
sponsibility of the driver.
The bicycle is subject to wear and high
stress as are all other mechanical com
-
ponents. Depending on the degree of
stress imposed on them, different mate
-
rials and parts may react differently in
terms of wear and fatigue. A part may
suddenly fail and cause injuries to the
driver when its designed service life is
exceeded. Any kind of cracks, scratches
or colour changes in high-stress areas
are an indicator that the service life of
the component has been exceeded and
that it should be replaced.
22. Inspection plan
After the rst 200 ridden kilometres
or after 4 months:
FLYER specialist retailer:
• Check the rm attachment of all screws, nuts
and quick release fasteners
• Check the wheels and centre them as required
• Check the tyres
• Check the fastening torque on all parts
• Adjust the headset
• Check the brake and shifter cables
• Check the gear system and adjust if necessary
• Check the brakes, adjust if necessary
• Check the suspension elements, adjust if nec
-
essary
• Sufcient lubrication of all components
FLYER driver:
During your e-bike's rst inspection by the FLYER
specialist retailer, ask them to explain the cor
-
rect processes for cleaning and oiling the chain
after rain and checking components for function
or damage.
Before each ride
FLYER driver:
• Check the correct position of the bell
• Check the function of the lighting system
• Check the function of the brakes
• Check the function of the gear system
• Check the function and correct setting of sus
-
pension elements
• Are all quick release fasteners, quick release
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam
-
age as well as safe attachment and correct
fastening
To Next Page
Loading...
