Flyer UPROC - Safety instructions for all electrical systems

8
1. Your FLYER has an automatic protec-
tion against overheating. In the case
of overheating, this protection will
switch
o󰀨themotorfunctionuntilthe
motor has reached a non-critical tem
-
perature. The remaining functions will
continue to operate.
2.
The system, including all lights, will
automatically be switched o󰀨 when
the pedals are not used for 10 min
-
utes. Therefore, always be sure to
turn on the display before each ride.
4. Safetyinstructions
forallelectrical
systems
Read all the safety instructions and regula-
tions.
Non-compliance with the safety instructions and
regulations
mayleadto electric shock, re and/
or severe injuries.
Keep all safety instructions and regulations
forfutureuse.
The term “battery” in these operating instructions
refers to all standard batteries.
Your FLYER is supplied with the corresponding
operating manual for the integrated motor from
the component manufacturer.
You are strongly advised to carefully read the
attached instruction manual to the electric drive
systembeforeyouuseyourbikeforthersttime
and to make note of all the listed safety instruc
-
tions.
Information concerning the bike’
s operation,
maintenance, care and technical data can be
found in the FLYER e-bike’s instruction manual or
on the manufacturer’s website for the each of the
bike’s components.
1. Remove the battery from the e-bike
before you begin working on it (i.e.
installation, maintenance, working on
the chain, etc.). The same applies
when storing the bike or transporting
it with a car, train or plane. There is a
risk of injury if the electrical system is
unintentionally activated.
2. The electric drive system built into
your FLYER e-bike is extremely
powerful. Correct and safe operation
requires you to have your FLYER
regularly maintained by a specialist
retailer. Immediately remove the bat
-
tery when you notice damage to the
electrical system, particularly when
live
 parts are exposed after an ac-
cident. Always contact your FLYER
specialist retailer when you require
repairs, want to ask a question, have
a problem or discover a defect.
A lack
of technical knowledge can lead to
severe accidents, injuries or damage.