Flyer UPROC - Loading the battery

21
EN
den temperature change from cold to
warm. It is possible that condensed
water has collected on the contacts
and this will lead to a short circuit. Do
not connect the battery to the charger
immediately after a sudden tempera
-
ture change from cold to warm. Wait
until both
devices have reached room
temperature before connecting the
charger or the battery. Always charge
and store the battery and the charger
in a dry and clean environment.
3. Use only the original Bosch charger
supplied along with your e-bike. Only
this charger is designed for the lithi
-
um-ion battery used on your e-bike.
4.
The battery is supplied partially
charged. Completely charge the
battery using the charger before the
rst ride to ensure full battery per
-
formance. Read and adhere to the
operating
instructions for the charger
when loading the battery.
The battery can at any time be charged outside
or installed in the bicycle without reducing its life
span. Interrupting the charging process does not
damage the battery.
The battery is equipped with a temperature mon
-
itor that permits charging only within a tempera-
ture range of 0 °C to 40 °C. Three of the charging
status
indicatorLEDswillashwhenthebatteryis
outside the charging temperature range A1.
In this case, separate the battery from the charger
and wait until it has reached operating tempera
-
ture. Only reconnect the charger when it has
reached the permitted operating temperature.
1.
The charging time increases when
the battery temperature is very low.
2. Prevent extreme overheating due to
externale󰀨ectsoroverloading.
3. Only use the battery with your FLYER.
4. Never use a damaged battery. If you
discover cracks, deformation of the
housing or leaks, stop using the bat
-
tery and have your FLYER checked
by a specialist retailer
.
Damaged bat-
teries must not be posted.
5. In cold weather, only insert the bat-
tery shortly before beginning riding.
The lighting function will
still continue
forapprox.onehourafterthebattery
is empty.
A4
A3
A5
A6
A1A2
A8
A7
Do not charge a damaged battery and
do not use it. Contact an authorised
FLYER bicycle dealer. Damaged batte-
ries must not be posted.
5.5 Loadingthebattery
Safety warning for the battery charger:
The name plate on the charger refers to
warning notes and other safety informa-
tion in connection with handling the
charger
. Be sure to read this before use.
1. You should also familiarise yourself
with all the information and instruc-
tions contained in the separate oper-
ating instructions for the battery and
the charger
.
2. Do not connect the charger to the
mains socket immediately after a sud
-