Protocol Connection type
Comli Fixed
Comli Dialled
Modbus Fixed
Modbus Dialled
Aquacom Fixed
Aquacom Dialled
Aquacom Dialled + SMS Alarms
(Reference: Open Manual for further information on protocols).
Status View
The status view can show, for example:
• Momentary status of the station
• Daily operating data,
and
• List of active alarms
Additional parameters, alarms, and values supported by the RTU can be added to the
status view.(Reference: “Appendix B: Tag List”).
Remote Control
The following functions can be controlled remotely:
Start P1
Start Pump 1/Stop Pump 1
Start P2 Start Pump 2/Stop Pump 2
Block Block all pumps
Reset Reset motor protection
Resume to auto Functions will no longer be controlled remotely
Keep in mind: If communication to the RTU is lost, the pump will return to automatic mode
after 30 seconds.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Appendix C: SCADA Systems
APP 541 User manual 69
To Next Page
Loading...
