Flymaster Vario - Switching VARIO On and Off; Resetting the VARIO

the menu, UP, and DOWN keys can be used to scroll up, and down, through the menu
options list. Once the desired option is selected, the option is highlighted, and the ENTER
key should be used to access the option. Depending on the menu option, either appears a
new menu options list, or a data fields list appears. Going back from a menu can be
achieved using the MENU key.
When accessing data fields the associated menu option becomes “grayed” and the
respective field data item is highlighted. Using the UP, and DOWN, keys changes the
value on each field. When the correct value appears pushing the ENTER key moves to the
next field, or in same cases to the next character/digit. Conversely, pushing MENU key
moves to the previous field, or to the next character/digit.
If the ENTER key is pushed on the last field all the data in the selection section is stored
and control returns to the configuration menu. Inversely, if the MENU key is pushed on the
first data field the changed settings are ignored and control is returned to the configuration
menu.
When setting a data field that involves setting several characters, e.g. when defining a
waypoint name, after defining the desired characters, then pushing the ENTER key
continually for more than 2 seconds will make the cursor jump to the next data field, or
return to the configuration menu if no more data field needs to be set.
3.4 Switching VARIO On and Off
To switch on the VARIO, briefly push the S1 key (Menu Key). This will display the start
up screen with a 10 second countdown . Pushing the S2 (Enter key) before the 10
seconds have elapsed will power up the VARIO. VARIO initiates in flight mode. If the S2
key is not pushed within 10 seconds the VARIO will go back to sleep.
To switch off the VARIO, push the S1(menu key) to activate menu mode, using the
arrow keys (S3 or S4) scroll the cursor to the “Shutdown” item and push the S2(Enter
Key).
3.5 Resetting the VARIO
The reset procedure allows the pilot to restart the VARIO if it freezes, or stop
responding. To reset the VARIO just push S1 (Menu key) and the S4 (Down arrow key)
Document version: 2.0 Page 8